Examining how to fill teeth with composite and amalgam
The way to fill teeth will be different according to the type of filling used. In this article from Dr. Hossein Borjian's website The best dentist in Isfahan We examine how to fill teeth with composite and amalgam. But the general steps used for tooth filling are as follows:
check up – The first stage
When you go to the dentist for a tooth extraction, he will use a small mirror to evaluate the surfaces of all your teeth and check for signs and symptoms. Tooth Decay It also deals with its cracking or breakage, which causes the tooth to decay in the future, and will explain the important points related to filling teeth or other available treatment methods, and also requests to take photos of the teeth in order to get a better picture of them. Get the condition of your teeth. The dentist will talk to you about the need for tooth filling. You have probably noticed your tooth decay. And you have toothache or sensitivity. Or even your old filling is removed from your tooth.
numb – The second stage
If the decay occurs only on the surface of the tooth, the dentist may not use anesthesia at all. He can pierce damaged tooth enamel without causing any pain. In most cases, the dentist injects an anesthetic around the tooth so that you do not experience pain, and you may use an anesthetic gel on the gums to reduce the amount of pain and discomfort caused by the injection itself..
Evacuation of decay – The third stage
After the anesthetic has taken effect, the dentist will remove the decayed points of the tooth. And to do this, he will use a high-speed dental drill or an abrasion or laser machine. This part is less unpleasant for most people, but thanks to the anesthetic used, they feel pain and only feel the vibration and pressure from the drill or other dental tools..
The sound of drilling the teeth is very loud, especially the teeth in the upper row. But if you don't want your mind to be focused on this issue, you can listen to music through headphones.. After all the tooth decay points are removed. The dentist examines the hole inside the tooth to make sure. which is sized and shaped to hold the filling in place.He also ensures that the cavity created is completely clean and sterile and is ready for the filling to be installed..
filling teeth – The fourth stage
To use amalgam fillings, the required materials are precisely and quickly mixed before use, and dentists place them in the created hole and allow it to harden.. In composite filling, first the surface of the tooth is cleaned using an acid gel so that the bonding is done well, and after 15 seconds the gel must be removed from the tooth and a rough surface remains.. Then the dentist places a thin layer of bonding on the surface to be treated. This layer helps the composite material to bond well to the tooth.
The Instagram page of Dr. Hossein Borjian, the best dentist in Isfahan
We note that today some manufacturers combine these two steps. to obtain a product that does not require the step of brushing teeth. Bonding material and composite filling material should be hardened using blue light. Based on the filling depth required to fill the teeth, the dentist prepares Dental composite does it in several stages and progresses gradually. Before the filling is hardened by blue light, its appearance and consistency are similar to concrete, and in this way, the dentist can press it well into the created hole and shape it correctly..
If you use ceramic or gold filling, the procedure will be different at this stage. The dentist prepares a mold of your tooth and sends it to the dental laboratory and places a temporary filling on your tooth.. You have to remove the filling a few days later after it is ready to complete the tooth restoration process.
Attention :
- The scientific accuracy of the above material should be confirmed by the patient's personal consultation with Dr. Borjian.
- This article was managed and published by the site admin.
