Review and comparison of digital and traditional molding
In the continuation of this article, Dr. Hossein Borjian's website The best implant in Isfahan We examine digital and traditional molding.
The percentage of molding error
The traditional molding method involves the use of different materials and several steps. Traditional molding is a very delicate and sensitive method, as a result, the possibility of human error or problems such as the presence of holes or air bubbles in the molding materials is high in this method..
The digital molding method greatly reduces the above problems and the amount of error caused by traditional molding. Also, molding time is saved in this method.
In physical molding, the dentist to ensure the desired quality of molding in order to send to Laboratory, they use visual evaluation. Traditional negative molding (negative) is prepared and as a result it will be more difficult to detect errors in the format. If any error is detected, the dentist must prepare another mold. In this case, the patient must return to the dentist's office for molding, and the previous steps must be repeated again. As a result, the patient's satisfaction with the treatment process decreases and the amount of material consumption and the cost required for molding increases..
Plus molding Digital It allows the dentist to view the images positively and in a larger size for a more accurate evaluation. Before sending the template to the laboratory, it is also possible to quickly fix any errors. With the help of digital molding, after scanning the final mold and registering the contact between the teeth, the dentist can see the virtual model on the screen.. The virtual model shows how the upper and lower teeth are placed on each other.
This technology provides the possibility of showing insufficient tooth grinding in color. As a result, the dentist can change the amount of tooth grinding to ensure the placement of the final restoration and its proper function.
Dr. Hossein Borjian's Instagram page The best implant in Isfahan
The number of sessions required for molding
With the help of computer molding tools, there is no need to return to the dentist's office in most cases. If a portion of the original digital scan is missing, some digital overprinters such as the Lava C.O.S allow the scan to be corrected without the need for re-overprinting..
With the help of digital molding, the dentist can layer an additional scan on top of the original virtual model to improve the image presentation.. Repeating the scan in order to record images without any errors will improve the previous virtual model. In this case, only the missing information in the previous scan is added to the model. Performing more scans results in a more accurate model. Such a case is not possible in traditional molding.
Materials needed in molding
Digital molding requires placing the molding material in the mouth for more than five minutes (which is done in traditional molding) fixes. As a result, the satisfaction and comfort of the patient is provided more and more, and the patient is more willing to take care of and repair his teeth..
Attention :
- The scientific accuracy of the above material should be confirmed by the patient's personal consultation with Dr. Borjian.
- This article was managed and published by the site admin.
Read more :
Reasons for replacing amalgam with composite
The application of porcelain to metal coatings
